The bright white tiles in the bathroom, which give the impression of extreme cleanliness and hygiene, are every woman’s dream.

Those who especially care about cleanliness  will want to enter the bathroom and find it super clean  , free of stains, water splashes and streaks.

It is difficult to continue like this, because normally a perfect bathroom in perfect condition is only achieved at the beginning, when everything is new. Especially tiles, which  yellow easily over time  , including joints.

Fresh and clean bathroom for long and pleasant moments of relaxation.

The bathroom is the place of relaxation, where you can more or less spend more time enjoying  intimate moments  , taking relaxing and refreshing showers in summer, hot and scented baths in winter.

It also welcomes women and their time-consuming makeup, or checks in when you’re late. In short, it is like a second living room, but more private. Sometimes cleaning is postponed precisely for this reason, especially when there are many people in the house,  it is difficult to find a free bathroom  .

This ends up becoming a big problem, because over time the surfaces become ruined. It must be said, however, that there are a thousand ways and secrets that allow you to clean even  bathroom tiles naturally  , therefore without using chemicals of any kind, obtaining incredible results.

How to clean tiles and make them white and shiny again

Whether it’s the shower tiles or the wall tiles, just a few drops of water that don’t dry properly are enough to form  annoying limescale  that gives the bathroom the old, neglected feel, even in a new bathroom.

To eliminate them, it will be necessary to spray the affected surfaces, that is, those of the shower cabin or sink, with a mixture of water and white vinegar, of the same size. Then let  the solution sit for a few minutes  and dry with a spatula. Finally polish,  using an antistatic cloth  . The result will be exceptional.

A second remedy always consists of water and vinegar, but  adding a few drops of  dish soap or Marseille soap. They are mixed and applied to the tiles with a sprayer. Then scrub it with a non-abrasive sponge and rinse, simply  with hot water.  At the end of the procedure, dry with a dry cloth.

How to Whiten Bathroom Tile Grout

The tile joints are the delicate point.  The water that falls to the ground when we wash our hands, or when we shower or finish showering, is deposited there  . Cleaning them is pretty easy, but obviously takes some time.

Then you take a toothbrush, prepare a glass with baking soda and another with hydrogen peroxide. Lightly wet the powder with drops of hydrogen peroxide,  dip it in the toothbrush  and rub the joints well. A few super vigorous strokes are enough to leave them practically like new.

Alternatively,  you can use steam  , which is obviously effective but requires no effort or commitment. In just a few minutes the tiles and joints in the bathroom are perfect again.

Tips to avoid staining or ruining tiles

Obviously, before proceeding to clean all the joints and tiles, it is advisable  to test the jet on the surfaces  and then continue if the tiles remain intact. There are some materials on which certain products cannot be used, which run the risk of staining.

For this reason you have to be careful. The result will be impeccable, the cleaning and sanitizing action will be profound, you will not regret in any way the use of specific products.