Keeping your toilet spotless can be a challenge, especially when it comes to yellow stains, smudges, and watermarks.

Fortunately, with a few simple ingredients and a little effort, you can restore your toilet to its sparkling clean look.

This homemade mix is effective and easy to prepare.

Ingredients

• 3 tablespoons baking soda
• 50 ml of multipurpose
• 1/2 bottle of hydrogen peroxide 40 volumes
• 35 g toothpaste (1/2 tube)
• 1 multi-purpose abrasive fiber

Preparation and how to use

1. Remove the toilet seat: Unscrew the nuts on the bottom of the toilet seat and carefully remove it.
2. Prepare the mixture: In a bowl, place the baking soda, all-purpose powder, 40-volume hydrogen peroxide, and toothpaste. Mix well until you get a homogeneous paste.
3. Remove the water from the toilet: Using latex gloves and a disposable cup, remove as much water as possible from the toilet bowl, pouring the water down the bathroom drain.
4. Apply the mixture: Apply the prepared mixture to the multi-purpose abrasive fiber.
5. Scrub the toilet: Rub the entire toilet bowl with the abrasive fiber impregnated with the mixture, making sure to coat both the inside and outside of the toilet.
6. Let it act: Leave the mixture on for at least 1 hour for it to take effect.
7. Rinse: Flush the toilet with plenty of water to remove all residue from the mixture.
8. Reassemble the seat: Once clean, reassemble the toilet seat in place.

Councils:

• Protection: Wear latex gloves throughout the process to protect your hands from chemicals.
• Ventilation: Make sure the bathroom is well ventilated while cleaning to avoid inhaling fumes.
• Regular cleaning: To keep the toilet clean and stain-free, repeat this process once a month or as needed.
• Natural alternative: If you prefer a more natural option, you can substitute white vinegar for the all-purpose one, although it may be less effective for severe stains.

I guarantee you’ll be impressed with the results of this easy homemade toilet cleaning mix!